Schlagwort: PPWR

  • EU Creates Clarity for Stretch Films & Hoods

    EU Creates Clarity for Stretch Films & Hoods

    With the new European Packaging and Packaging Waste Regulation (PPWR), many companies in the packaging industry still face uncertainty. Particularly affected: pallet wraps and strapping bands, which are used daily for safe goods transport.
    A delegated decision by the EU Commission now brings important clarity – and relief for users of flexible packaging.

    What is this specifically about?

    The PPWR sets ambitious reuse targets for transport packaging in the long term. For certain use cases, even one hundred percent reusability was envisaged – such as for internal transport or between companies in the same Member State.

    This is precisely where the Delegated Decision (EU) 2026/429 comes in:
    It exempts pallet wraps (e.g. stretch films) and strapping bands used to secure palletized goods from this 100% reuse requirement.

    The key statements of the decision – briefly explained

    For companies in the flexible packaging industry, the new regulations mean above all one thing: realism instead of blanket requirements.

    • No obligation for 100% reusability for pallet films
      Stretch films and strapping bands may continue to be used as single-use solutions, including for internal or national transport.
    • Recognition of technical and economic limitations
      The EU Commission clarifies that a complete switch to reusable pallet wraps would currently involve disproportionately high costs, a lack of market maturity for automated systems, and potential disruptions to supply chains.
    • System targets remain in place
      However, the general reuse target of 40% for transport packaging remains. Different packaging formats can be offset against each other.

    What does this mean in practice?

    For users and manufacturers of flexible packaging, the decision is an important signal:

    “Not every packaging is sensible and economically reusable with today’s state of technology – and this is exactly what the EU Commission expressly recognizes here.”

    Single-use stretch films thus remain a recognized and necessary packaging material, provided they are used functionally, safely and efficiently. The focus shifts away from blanket reuse towards appropriate system solutions that consider product protection, logistics and sustainability together.

    Assessment from the testing laboratory perspective

    This decision confirms a key insight from practice for packers and manufacturers of stretch films: Sustainability cannot be determined solely by reusability. Material usage, product protection, process reliability and recyclability also play a crucial role.

    The new EU decision thus creates planning certainty – and a reliable basis for factual discussions around packaging strategies under the PPWR.

  • NEW: PFAS analysis via total fluorine determination

    NEW: PFAS analysis via total fluorine determination

    Upon the entry into force of the PPWR Regulation (Regulation (EU) 2025/40 on packaging and packaging waste), packaging producers will be asked, from 12 August 2026, to draw up a declaration of conformity in accordance with Article 39. This declaration must demonstrate that the requirements set out in Articles 5 to 12 have been met or confirmed.

    Article 5(5) sets out specific limit values for per- and polyfluoroalkyl substances (PFAS) in packaging materials that come into contact with food, and defines a three-tier limit value system:

    • 25 ppb for individual PFAS (analysed specifically), 
    • 250 ppb for the total of these substances as well as 
    • 50 ppm for the total PFAS content, including polymeric compounds (determined by the total fluorine content)

    When drawing up the declaration of conformity, the PPWR requires that a conformity assessment procedure in accordance with Annex VII be carried out. This procedure is supported by technical documentation. This must include an “adequate analysis and assessment of the risks of non-conformity” and may, where necessary, be supplemented by test reports or similar evidence (Annex VII, Article 2). 

    If it can be demonstrated throughout the supply chain that the raw materials used do not contain any PFAS and that these cannot enter the product during production, analytical testing may not be required, subject to an appropriate risk assessment. 

    However, if there is no definitive confirmation (e. g. because information is missing), it is advisable to carry out appropriate tests or plausibility checks to ensure that the packaging material is free from PFAS.

    It can be assumed that most plastic film packaging, particularly that made from PE and PP, contains PFAS. (Karsten Schröder)

    In a set of guidelines on the PPWR Regulation announced by the European Commission at the end of 2025, the following analysis strategy is proposed: 

    1. Determination of total fluorine content (TF): Provided that the TF is below 50 ppm, the material shall be considered compliant; no further analysis is required.
    2. If the total fluorine content exceeds 50 ppm, a distinction must be made between organic fluorine (TOF) and inorganic fluorine (TIF). If the organic fluorine content is below 50 ppm, the material is to be regarded as compliant. If the content exceeds 50 ppm, the material would ultimately be deemed non-compliant. Further analyses to verify compliance with the limit values set out in Article 5(5)(a) and (b) would be possible; however, as the material has already been assessed as non-compliant, this is neither mandatory nor recommended. 

    To meet these requirements, the Innoform Testing Service has been offering tests for the total fluorine content and the organic fluorine content (both as subcontracted services) since early 2025.

    Due to increased demand, the Innoform Test Service has begun to introduce its own in-house analytical method. Using Combustion Ion Chromatography (CIC), the total fluorine content is determined in accordance with DIN EN 17813 using oxidative pyrohydrolytic combustion, followed by ion chromatography, which is ideally suited to ensuring compliance with the limit value of 50 ppm.

  • Regulation (EU) 2022/1616 and its Impact on the Flexible Packaging Industry

    Regulation (EU) 2022/1616 and its Impact on the Flexible Packaging Industry

    Introduction

    Regulation (EU) 2022/1616 is a significant step by the European Union to regulate the use of recycled plastics in food contact materials. For the flexible packaging industry, this regulation brings clear requirements and challenges that manufacturers, recyclers, and food companies must consider.

    Background of the Regulation

    The regulation was introduced to ensure that recycled plastics coming into direct contact with food are safe and compliant. It replaces the earlier Regulation (EC) No. 282/2008 and contains updated requirements relating to recycling technologies, decontamination processes, and traceability in the supply chain.

    Essential Requirements for Recycling Processes

    A central element of the regulation is the authorization of recycling processes at EU level. This means that only recycled plastics for food packaging may be used that originate from EU-approved processes. These processes must be evaluated and approved by the European Food Safety Authority (EFSA) to ensure they meet the required decontamination standards.

    Requirements for the Flexible Packaging Industry

    For manufacturers of flexible packaging, this means they may only source recycled plastic from registered and compliant recycling sources. Each manufacturer must provide a Declaration of Compliance confirming compliance with the regulation. This declaration must be passed along the entire supply chain to ensure transparency and traceability.

    Decontamination and Quality Control

    Another important aspect is decontamination. Recycling processes must demonstrate that they reduce contaminants to a safe level. This requires documented quality controls that ensure the recycled plastic meets food law requirements.

    Conclusion and Outlook

    Regulation (EU) 2022/1616 ensures that flexible packaging containing recycled plastic meets uniform safety standards throughout the EU. For the industry, this means on the one hand more regulatory effort, but on the other hand also the opportunity to bring sustainable and safe packaging solutions to market that meet the demands of consumers and legislation.


  • Key Findings of the PPWR at a Glance

    Key Findings of the PPWR at a Glance

    Many companies are currently facing the challenge of understanding and implementing the specific requirements of the new EU Regulation 2025/40 on packaging and packaging waste. The following article is based on a web seminar* by Innoform Coaching and provides a practice-oriented overview of the central content of the regulation – from stricter recycling quotas to extended producer responsibility. A compact overview of obligations, deadlines and areas of action is included for implementation.

    Dieter Finna

    The European Packaging Regulation EU 2025/40, known as the Packaging and Packaging Waste Regulation (PPWR), forms the updated legal framework for packaging and packaging waste in the European Union.

    It replaces the previous Packaging Directive 94/62 EC and amends, among others, Regulation (EU) 2019/1020 (Compliance Regulation) and Directive 2019/904 (Single Use Plastic). The aim of the regulation is to significantly reduce packaging waste, promote recycling and circular economy, and harmonize requirements within the European Union. It entered into force on February 11, 2025 and applies directly in all EU Member States, meaning that implementation into national laws is not required. With entry into force, a transitional period of 18 months began, after which the provisions of the regulation are to be applied bindingly from August 2026.

    The PPWR comprises 71 articles and 12 annexes and forms a comprehensive legal framework that is not fully formulated in many parts. Numerous specific requirements will be supplemented by delegated acts and implementing acts, which will be determined step by step by the EU Commission and published in good time before the respective obligations enter into force.

    Definition of Roles

    The PPWR explicitly describes the various roles from which the specific obligations of the actors are derived. A novelty is the distinction between producers and manufacturers. A producer is defined as the one who manufactures packaging or a packaged product. A manufacturer is the one who places the packaging (as a producer, importer or distributor) on the market. An importer is the one who places packaging or packaged products from a third country on the Union market. They have particular due diligence obligations regarding compliance.

    Responsibility as Producer and Manufacturer

    Manufacturers are subject to extended producer responsibility (EPR), which is described in detail in the PPWR. Manufacturers are obliged to ensure recyclable packaging design (Design for Recycling, DfR) and they bear responsibility for the design, material selection and labeling of packaging. Even if packaging is manufactured by a producer, responsibility for its compliance and recyclability remains with the manufacturer.

    The producer, in turn, is obliged to develop and provide suitable materials that meet the requirements for recyclability and sustainability. In addition, they must provide technical evidence and a declaration of compliance for the packaging product. As the producer, they have detailed knowledge of the material composition and are therefore obliged to provide the technical evidence.

    Restriction of Hazardous Substances

    Packaging placed on the market must be manufactured in such a way that the concentration of substances of concern in packaging material or packaging components is kept to a minimum. The regulation refers in Article 5(4) to Regulation (EC) No 1935/2004, according to which the sum of the concentrations of lead, cadmium, mercury and hexavalent chromium from substances in packaging or packaging components must not exceed 100 mg/kg.

    For packaging that comes into contact with food, limit values for PFAS (per- and polyfluorinated alkyl substances) are also set, which will apply from 2026. They are detailed in Article 5(5). This affects, for example, PFAS-containing processing aids that are added during the extrusion of films to reduce friction. Clear limits are set here.

    Reduction of Packaging Volume

    Currently, packaging accounts for 40% of plastic consumption in the European Union. By 2030, the packaging volume is to be reduced by 5%, by 2035 by 10% and by 2040 by 15%, based on the reference year 2018. This is to be implemented through avoidance of unnecessary packaging, reduction of packaging material, promotion of reusable systems and reduction of single-use packaging.

    Recyclability of Packaging

    Packaging materials should be reused as secondary raw materials as often as possible. This presupposes their recyclability, particularly for polymers, which Article 6 specifies at the Design for Recycling (DfR) level by 01.01.2030. From 01.01.2035, recyclability also applies “at scale”, i.e. on an industrial scale in a corresponding material stream. What exactly recycling at scale means will be issued by the Commission in an implementing act by 01.01.2030.

    In the future, there will be three performance levels for packaging material, which indicate the percentage of its recyclability. The exact criteria for determining the performance levels will be issued by the Commission by 01.01.2028. Level A will include materials that are ≥ 95% recyclable, B materials that are ≥ 80% and C those that are ≥ 70% recyclable. Materials with a recyclability < 70% count as technically non-recyclable materials. From 2030, there will be a ban on placing them on the market, which will also extend to performance level C materials from 01.01.2038.

    Article 6(1) of the PPWR, Recyclability (Source: Dr. Andreas Grabitz, presentation “Regulatory Challenges” Inno-Meeting, Osnabrück, Feb. 2025)

    Minimum Recycled Content in Plastic Packaging

    By 2030, PET packaging must contain 30% recycled content, other contact-sensitive packaging 10%, and non-contact-sensitive packaging 35%. When selecting materials, mono-materials and non-colored materials are preferred to increase recyclability.

    For pharmaceutical packaging, the requirements of the PPWR regarding minimum recycled content do not apply until 2038. The reason for this is the particular sensitivity in this sector – there must be no transfer of packaging materials to the medicine. In 2038, it will be reassessed at the European level whether and to what extent the pharmaceutical sector must also comply with minimum recycled content quotas in the future – possibly with requirements to be implemented by 2040 or beyond.

    Requirements for minimum recycled content in plastic packaging from the year 2030 (Source: pack.consult)

    And here you can access the web seminar series on this topic.

    Questions and suggestions welcome to Daniel Wachtendorf ts@innoform.de