Supported Testing Standards

Directory of standards supported by Innoform

Norm Selection

All (325) | Accredited (67) | ASTM D (20) | ASTM F (12) | DIN (52) | DIN EN (51) | DIN EN ISO (60) | DIN ISO (8) | FINAT FTM (9) | In-house (20) | ISO (16) | Other (77)
325 Norms in the list
Norm ↕ Version ↕ Description ↕ akk. ↕ since ↕ until ↕
2700 Blatt 14 2011-09 Securing of loads on road vehicles – Determination of coefficients of friction
34171 09-2024 Determination of the dynamic coefficient of friction on flexible material webs
4487 2017-07 Examination of quality-related properties of stretch film Valuation methods, and criteria
APR PET-S-01 2018-11 Labels for PET – Wash Water Evaluation
APR PET-S-02 (colorimetry only) 2018-11 PET Flake or Pellet Discoloration
APR PET-S-08 2018-11 PET Flake Clumping Evaluation
ASTM D 1003 2013-11 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D 1004 2013-04 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D 1204 2014 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 1434 (Method M) 2015 Standardmethode zur Bestimmung der Gaspermeationseigenschaften von Kunststofffolien und -platten
ASTM D 1604 (withdrawn) 1963 (Reapproved 1975 Flatness of plastic sheet or collapsed tubing
ASTM D 1693 2021 Prüfung der umweltbedingten Spannungsrißbildung bei Äthylen-Kunststoffen
ASTM D 1709 2024 Impact Resistance of Plastic Film by the Free-Falling Dart Method ✓ 12.2020
ASTM D 1894 2024 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting ✓ 12.2012
ASTM D 1922 2023 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method ✓ 12.2020
ASTM D 1938 2019 Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method ✓ 11.2022
ASTM D 2457 2013 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
ASTM D 2578 2017 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
ASTM D 3611 2006- Reapproved 2019 Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
ASTM D 3985 2024 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor ✓ 12.2012
ASTM D 523 2014 Standard Test Method for Specular Gloss
ASTM D 5276 2023 Standardprüfverfahren für die Fallprüfung von beladenen Behältern durch freien Fall
ASTM D 5458 95 (Reapproved 2020 Standard Test Method for Peel Cling of Stretch Wrap Film
ASTM D 6179 2020 Standard-Prüfverfahren für Grobhandhabung von Stückgütern und großen Versandkisten Kisten und Verschlägen
ASTM D 7709 – 12 01.05.2012 Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
ASTM D 882 2018-08 Standard Test Method for Tensile Properties of Thin Plastic Sheeting ✓ 12.2020
ASTM E 96 2022 Water Vapor Transmission of Materials ✓ 11.2022
ASTM F 1249 2025 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor ✓ 01.2024
ASTM F 1306 2021 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates ✓ 07.2007
ASTM F 1307 2014-06 Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
ASTM F 1921 2012 reapproved 2018 Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
ASTM F 1927 2014 Standard Test Method for Determination of Oxygen Gas Trans-mission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector ✓ 12.2012
ASTM F 1929 2023 Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
ASTM F 1980 2016-09 Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices
ASTM F 2252/ F 2252M:2013 2013 reapproved 2018 Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
ASTM F 3299 2023 Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P2O5 Sensor) ✓ 02.2026
ASTM F 392/ F 392M reapproved 2021 Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability
ASTM F 88/ F 88M 2023 Standard Test Method for Seal Strength of Flexible Barrier Materials ✓ 10.2015
ASTM F 904 2016 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
BfR-method / 24. Mitteilung (Kunststoff) BGesundhBl. 15, 285 1972-07 Testing of colored consumer goods made of plastic and other polymers for color bleeding
BfR-method LC-GC-FID 2019
DAkkS Document 71 SD 0 002 (withdrawn) 13.08.2015 Flexibilization of the accreditation scope of testing laboratories, calibration laboratories and medical laboratories
DAkkS Document 71 SD 0 004 (withdrawn) 01.02.2016 Guideline for the use of computer systems in accredited laboratories
DAkkS Document 71 SD 0 005 (withdrawn) 01.02.2016 Instruction sheet on metrological traceability within the scope of accreditation procedures
DAkkS Document 71 SD 0 006 (withdrawn) 20.12.2023 Traceability of measuring and test equipment to national standards
DAkkS Document 71 SD 0 010 (withdrawn) 14.04.2016 Incorporation of proficiency testing into accreditation
DAkkS Document 71 SD 0 010 – Anhang 1 (withdrawn) 09.04.2013 Annex 1 to the Rule on the incorporation of proficiency testing into accreditation – case studies -.
DAkkS Document 71 SD 0 010 – Anhang 2 (withdrawn) 09.04.2013 Annex 2 to the Rule on the Incorporation of proficiency testing in accreditation – Example tables –
DAkkS Document 71 SD 0 011 (withdrawn) 28.04.2016 Rules for accredited conformity assessment bodies on the use of the accreditation certificate, the accreditation symbol of the Deutsche Akkreditierungsstelle GmbH as well as on other references to the accreditation
DAkkS Document 71 SD 4 016 (withdrawn) 20.12.2023 Guideline for estimation of measurement uncertainty according to requirements of DIN EN ISO/IEC 17025 for testing laboratories in the field of chemical analysis in the areas of consumer health protection, agricultural sector, chemistry and environment
DAkkS Document 71 SD 4 019 (withdrawn) 20.12.2023 Validation and verification of test methods according to the requirements of DIN EN ISO/ IEC 17025 for testing laboratories in the field of chemical and chemical-physical analysis in the area of department 4
DAkkS Document 71 SD 4 027 (withdrawn) 20.12.2023 Guidelines and examples of monitoring periods for test facilities for laboratories in the areas of consumer health protection, the agricultural sector, chemistry and the environment, and veterinary medicine and pharmaceuticals.
DAkkS Document 71 SD 4 032 (withdrawn) 10.07.2017 Guidelines for the flexibilization of the accreditation scope of laboratories in the areas of consumer health protection, plant health and protection / animal welfare and chemistry / environment
DAkkS Document EA-2/15 M 20.11.2023 Anforderungen der EA an die Akkreditierung flexibler Geltungsbereiche
DAkkS Document EA-3/01 M 06.06.2025 Bedingungen von EA für die Verwendung von Akkreditierungssymbolen, Logos und anderen Hinweisen auf die Akkreditierung sowie von Verweisen auf den Status als Unterzeichner des EA MLA
DAkkS Document EA-4/02 M 05.11.2021 Evaluation of the Uncertainty of Measurement in Calibration
DAkkS Document ILAC R7 05/2015 ILAC Rules for the Use of the ILAC MRA Mark
DAkkS Document ILAC-P10 07/2020 ILAC Policy on the Traceability of Measurement Results
DAkkS Document ILAC-P14 09/2020 ILAC-Richtlinie zur Messunsicherheit bei Kalibrierungen
DAkkS Document LI-013 01.08.2025 List DAkkS – Rules and Regulations
DAkkS Document LI-014 15.10.2025 Verzeichnis des Regelwerks der DAkkS
DAkkS Document LI-015 02.12.2025 Übersicht internationaler Regeln die in die Verwaltungspraxis der DAkkS für Akkreditierungsverfahren übernommen wurden
DAkkS Document R-17011 25.02.2025 Rule for application of DIN EN ISO/IEC 17011 for the accreditation of conformity assessment bodies
DAkkS Document R-17025-PL 31.01.2023 Rule for accreditation of testing laboratories according to DIN EN ISO/IEC 17025:2018
DIN 10950 2020-09 Sensory analysis – Basic principles 12.2020 01.2026
DIN 10955 2024-01 Sensory analysis – Testing of packaging materials and packages for foodstuffs ✓ 12.2012
DIN 10964 2014-11 Sensory analysis – Simple descriptive test ✓ 01.2018
DIN 10976 2016-08 Sensory analysis – Difference from Control-Test (DfC-Test) ✓ 11.2022
DIN 16524-5 2012-06 Testing of prints and printing inks in graphic technology – Resistance to various physical and chemical influences – Part 5: Resistance to sterilization with autoclave
DIN 16906 2015-01 Testing of plastic sheeting and plastic films – Sample and specimen – Preparation and conditioning
DIN 16922 1981-02 Flexible sheet materials made of plastics – Technological classification
DIN 16995 2016-04 Films for packaging – Plastic films – Properties, testing
DIN 32645 2008-11 Chemical analysis – Decision limit, detection limit and determination limit under repeatability conditions – Terms, methods, evaluation
DIN 38405-4 (based on) 1985-07 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of fluoride (D 4)
DIN 50011-12 Air temperature as a climatological quantity in controlled-atmosphere test installations
DIN 50014 2018-08 Standard atmospheres for conditioning and/or testing — Specifications
DIN 5020 September 2022 DIN/TR 5020 Introduction to colorimetric principles for quality management
DIN 5033-1 2017-10 Colorimetry – Part 1: Basic terms of colorimetry
DIN 51451 2020-02 Testing of petroleum products and related products – Analysis by infrared spectrometry – General working principles
DIN 51777 2020-04 Petroleum products – Determination of water content using titration according to Karl Fischer
DIN 53107 2016-05 Testing of paper and board – Determination of the smoothness by the Bekk method
DIN 53116 2003-02 Testing of paper – Determination of grease permeability
DIN 53121 2014-08 Testing of paper and board – Determination of the bending stiffness by the beam method
DIN 53122-1 2001-08 Testing of plastic and elastomer films, paper, board and other sheet materials – Determination of water vapour transmission – Part 1: Gravimetric method ✓ 11.2022
DIN 53160 2023-07 Determination of the colourfastness of articles for common use – Test with saliva and perspiration simulants
DIN 53236 2018-02 Colouring materials – Conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics
DIN 53357 1982-10 Testing of plastic sheets and films – separation test of layers ✓ 07.2007
DIN 53363 (withdrawn) 2003-10 Testing of plastic films – Tear test using trapezoidal test specimen with incision ✓ 10.2015
DIN 53366 2007-10 Testing of plastic films and sheetings – Determination of blocking strength
DIN 53369 1976-02 Testing of plastic films; determination of the shrinking stress
DIN 53370 2006-11 (zurückgezogen Testing of plastics films – Determination of the thickness by mechanical scanning 07.2007 01.2026
DIN 53373 (withdrawn) 1970-09 Impact penetration test combined with data recording by means of electronic devices
DIN 53377 2015-04 Testing of plastic films – Determination of dimensional stability
DIN 53380-2 2006-11 Testing of plastics – Determination of gas transmission rate – Part 2: Manometric method for testing of plastic films
DIN 53380-3 1998-07 Testing of plastics – Determination of gas transmission rate – Part 3: Oxygenspecific carrier gas method for testing of plastic films and plastics mouldings ✓ 12.2012
DIN 53505 (withdrawn) 2000-08 Shore A and Shore D hardness test
DIN 53515 (withdrawn) 1990- 01 tear test using the Graves angle test piece with incision
DIN 54378 (based on) 2021-02 Testing of paper and board; Determination of the surface colony count OKZs
DIN 55403 2014-07 Packaging test – Test method for packaging films – Determination of the tendency to curl
DIN 55404 2020-08 Packaging test – Method of test for determining the pattern repeat of flexible packaging materials
DIN 55409-1 2012-09 Packaging – Test method for determining opening forces for peelable packagings – Part 1: Flexible packagings ✓ 12.2020
DIN 55409-2 2013-10 Packaging – Test method for determining opening forces for peelable packagings – Part 2: Dimensionally stable packagings ✓ 12.2020
DIN 55445-2 2016-09 Packaging test; determination of endurance of seams of plasticsacks
DIN 55508-2 2019-04 Packaging test – Leakage test on flexible packagings – Part 2: Color method
DIN 55529 2012-09 Packaging – Determining the sealed-seam strength of sealings made of flexible packaging material ✓ 07.2007
DIN 55530 2011-05 Films for packaging – Barrier materials made of low density polyethylene (PE-LD) films and recyclates
DIN 55531 2011-05 Films for packaging – Composite aluminium films
DIN 55543-1 2010-01 Packaging test – Test methods for packaging films – Part 1: Determination of the film thickness
DIN 55543-3 06-2010 Verpackungsprüfung – Prüfverfahren für Verpackungsfolien – Teil 3: Bestimmung der Festigkeit von Längsnähten an Säcken und Beuteln
DIN 55543-5 2017-10 Packaging Test – Test methods for packaging films – Part 5: Determination of adhesion strength ✓ 11.2022
DIN 55543-6 2019-04 Packaging test – Test methods for packaging films – Part 6: Determination of grammage
DIN 55571-2 2021-07 Hot-Tack – Part 2: Peel strength measuring devices
DIN 6125 2021-10 Packaging test – Opaque and/or white pigmented films – Determination of opacity
DIN 6127 02-2023 Verpackungsprüfung – Bestimmung des Auftragsgewichts von Klebstoffen, Druckfarben usw. in Verpackungsmaterialien
DIN 6730 2017-09 Paper, board and pulps- vocabulary
DIN CEN/TS 13130-16- Vornorm Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 16: Determination of caprolactam and caprolactam salt in food simulants
DIN CEN/TS 13130-26- Vornorm 2005-05 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 26: Determination of 1-octene and tetrahydrofuran in food simulants
DIN CEN/TS 13130-9- Vornorm 2005-05 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 9: Determination of acetic acid, vinyl ester in food simulants
DIN EN 10304-1 (based on) 2009-07 Water quality – Determination of dissolved anions by liquid chromatography of ions – Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
DIN EN 1186-1 2002-07 Materials and articles in contact with foodstuffs – Plastics – Part 1: Guide to the selection of conditions and test methods for overall migration ✓ 09.2008
DIN EN 1186-12 (withdrawn) 2002-07 Materials and articles in contact with foodstuffs – Plastics – Part 12: Test methods for overall migration at low temperatures 12.2012 11.2022
DIN EN 1186-13 2002-12 Materials and articles in contact with foodstuffs – Plastics – Part 13: Test methods for overall migration at high temperatures ✓ 12.2012
DIN EN 1186-14 (withdrawn) 2002-12 Materials and articles in contact with foodstuffs – Plastics – Part 14: Test methods for "substitute test" for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95 % ethanol 09.2008 11.2022
DIN EN 1186-2 2022-10 Materials and articles in contact with foodstuffs – Plastics – Part 2: Test methods for overall migration in vegetable oil ✓ 12.2012
DIN EN 1186-2 2022-10 Materials and articles in contact with foodstuffs – Plastics – Part 2: Test methods for overall migration in vegetable oil ✓ 10.2015
DIN EN 1186-3 2022-10 Materials and articles in contact with foodstuffs – Plastics – Part 3: Test methods for overall migration in evaporable simulants ✓ 09.2008
DIN EN 1186-4 (withdrawn) 2002-07 Materials and articles in contact with foodstuffs – Plastics – Part 4: Test methods for overall migration into olive oil by cell 12.2012 11.2022
DIN EN 1186-4 (withdrawn) 2002-07 Materials and articles in contact with foodstuffs – Plastics – Part 4: Test methods for overall migration into olive oil by cell 10.2015 11.2022
DIN EN 1186-5 (withdrawn) 2002-07 Materials and articles in contact with foodstuffs – Plastics – Part 5: Test methods for overall migration into aqueous food simulants by cell 09.2008 11.2022
DIN EN 1186-6 (withdrawn) 2002-07 Materials and articles in contact with foodstuffs – Plastics – Part 6: Test methods for overall migration into olive oil using a pouch 12.2012 11.2022
DIN EN 1186-6 (withdrawn) 2002-07 Materials and articles in contact with foodstuffs – Plastics – Part 6: Test methods for overall migration into olive oil using a pouch 10.2015 11.2022
DIN EN 1186-7 (withdrawn) 2002-07 Materials and articles in contact with foodstuffs – Plastics – Part 7: Test methods for overall migration into aqueous food simulants using a pouch 09.2008 11.2022
DIN EN 1186-8 (withdrawn) 2002-07 Materials and articles in contact with foodstuffs – Plastics – Part 8: Test methods for overall migration into olive oil by article filling 12.2012 11.2022
DIN EN 1186-8 (withdrawn) 2002-07 Materials and articles in contact with foodstuffs – Plastics – Part 8: Test methods for overall migration into olive oil by article filling 10.2015 11.2022
DIN EN 1186-9 (withdrawn) 2002-07 Materials and articles in contact with foodstuffs – Plastics – Part 9: Test methods for overall migration into aqueous food simulants by article filling 09.2008 11.2022
DIN EN 12086 2013-06 Thermal insulating products for building applications – Determination of water vapour transmission properties
DIN EN 1230-1 2010-02 Paper and board intended to come into contact with foodstuffs – Sensory analysis – Part 1: Odour
DIN EN 1230-2 2018-10 Paper and board intended to come into contact with foodstuffs – Sensory analysis – Part 2: Off-flavour (taint)
DIN EN 13130-1 2004-08 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and the selection of conditions of exposure to food simulants ✓ 12.2020
DIN EN 13130-1 (migration) 2004-08 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and the selection of conditions of exposure to food simulants
DIN EN 13130-7 2004-08 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 7: Determination of monoethylene glycol and diethylene glycol in food simulants
DIN EN 13206 2020-04 Covering thermoplastic films for use in agriculture and horticulture
DIN EN 13590 2003-07 Packaging – Flexible carrier bags for the transport of various retail goods – General characteristics and test methods for the determination of volume and carrying capacity
DIN EN 13592 2017-05 Plastics sacks for household waste collection – Types, requirements and test methods
DIN EN 13628-2 2003-01 Packaging – Flexible packaging material – Determination of residual solvents by static headspace gas chromatography – Part 2: Industrial methods ✓ 12.2025
DIN EN 13676 2001-06 Polymer coated paper and board intended for food contact- Detection of pinholes
DIN EN 14233 (based on) 2003-01 Materials and articles in contact with foodstuffs – Plastics – Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for migration testing
DIN EN 14338 2004-03 Paper and board intended to come into contact with foodstuffs – Conditions for determination of migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant ✓ 10.2015
DIN EN 14477 2004-06 Packaging, Flexible packaging material – Determination of puncture resistance – Test methods ✓ 07.2007
DIN EN 14582 (based on) 2016-12 Characterization of waste – Halogen and sulfur content – Oxygen combustion in closed systems and determination methods
DIN EN 14932 09-2025 Plastics- Thermoplastic stretch films for wrapping silage bales
DIN EN 15408 (based on) 2011-05 Solid recovered fuels – Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
DIN EN 15768 2015-05 Influence of materials on water intended for human consumption – GC-MS identification of water leachable organic substances
DIN EN 17679 08-2022 Plastic films – Determination of tear resistance using a trapezoidal test specimen with incision ✓ 03.2024
DIN EN 17813 (based on) 2024-03 Environmental solid matrices – Determination of halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography
DIN EN 1931 2001-03 Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of water vapour transmission properties
DIN EN 20105-A02 1994-10 Textiles – Tests for colour fastness – Part A02: Grey scale for assessing change in colour
DIN EN 22248 1993-03 Packaging; complete, filled transport packages; vertical impact test by dropping (ISO 2248:1985
DIN EN 29073-3 1992-08 Textiles; Test method for nonwovens; Part 3: Determination of tensile strengh and elongation
DIN EN 546-2 2007-03 Aluminium and aluminium alloys – Foil – Part 2: Mechanical properties ✓ 09.2008
DIN EN 546-3 2007-03 Aluminium and aluminium alloys – Foil – Part 3: Tolerances on dimensions
DIN EN 546-4 2007-03 Aluminium and aluminium alloys – Foil – Part 4: Special property requirements
DIN EN 61340-2-3 (VDE 0300-2-3) 2017-05 Electrostatics – Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
DIN EN 61340-5-1 (VDE 0300-5-1) 2017-07 Electrostatics – Part 5-1: Protection of electronic devices from electrostatic phenomena – General requirements
DIN EN 62631-3-1 (VDE 0307-3-1) 2017-01 Dielectric and resistive properties of solid insulating materials – Part 3-1: Determination of resistive properties (DC methods) – Volume resistance and volume resistivity – General method
DIN EN 62631-3-2 (VDE 0307-3-2) 2016-10 Dielectric and resistive properties of solid insulating materials – Part 3-1: Determination of resistive properties (DC methods) – Volume resistance and volume resistivity – General method ✓ 11.2022
DIN EN 646 2019-02 Paper and board intended to come into contact with foodstuffs – Determination of colour fastness of dyed paper and board
DIN EN 868-4-B 2025-09 Packaging for terminally sterilized medical devices – Part 4: Paper bags – Requirements and test methods ✓ 09.2008
DIN EN 868-5- D 2019-03 Packaging for terminally sterilized medical devices – Part 5: Sealable pouches and reels of porous materials and plastic film construction – Requirements and test methods ✓ 09.2008
DIN EN ISO 105-A03 2020-02 Textiles – Tests for colour fastness – Part A03: Grey scale for assessing staining
DIN EN ISO 105-A05 1997-07 Textiles — Tests for colour fastness — Part A05: Instrumental assessment of change In colour for determinatlon of grey scale rating
DIN EN ISO 1133-1 2022-10 Plastics – Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics – Part 1: Standard method
DIN EN ISO 11339 2022-05 Adhesives – T-peel test for flexible-to-flexible bonded assemblies
DIN EN ISO 11357-1 2023-06 Plastics – Differential scanning calorimetry (DSC) – Part 1: General principles
DIN EN ISO 11357-3 2025-09 Plastics – Differential scanning calorimetry (DSC) – Part 3: Determination of temperature and enthalpy of melting and crystallization ✓ 07.2007
DIN EN ISO 11358-1 2014-10 Plastics – Thermogravimetry (TG) of polymers – General principles
DIN EN ISO 11501 2004-10 Plastics – Film and sheeting – Determination of dimensional change on heating
DIN EN ISO 11607-1 2024-02 Packaging for terminally sterilized medical devices – Part 1: Requirements for materials, sterile barrier systems and packaging systems
DIN EN ISO 1183-1 2019-09 Plastics – Methods for determining the density of non-cellular plastics – Part 1: Immersion method, liquid pycnometer method and titration method
DIN EN ISO 12048 2001-04 Packaging – Complete, filled transport packages – Compression and stacking tests using a compression tester
DIN EN ISO 12572 2025-03 Hygrothermal performance of building materials and products – Determination of water vapour transmission properties – Cup method ✓ 11.2022
DIN EN ISO 13934-1 2013-08 Textiles – Tensile properties of fabrics – Part 1: Determination of maximum force and elongation at maximum force using the strip method
DIN EN ISO 15106-2 2005-5 Plastics; Film and sheeting – Determination of water vapour transmission rate – Part 2: Infrared detection sensor method ✓ 01.2024
DIN EN ISO 15106-3 2005-05 Plastics – Film and sheeting Determination of water vapour transmission rate – Part 3: Electrolytic detection sensor method ✓ 07.2007
DIN EN ISO 15512 (procedure B2) 2019-09 Plastics – Determination of water content
DIN EN ISO 17294-2 (based on) 2017-01 Water quality – Application of inductively coupled plasma mass spectrometry (ICP-MS) – Part 2: Determination of certain elements including uranium isotopes
DIN EN ISO 18314-1 Dezember 2018 Analytical colorimetry – Part 1: Practical colour measurement
DIN EN ISO 19011 10-2018 Guidelines for auditing management systems
DIN EN ISO 1924-2 2009-05 Paper and board – Determination of tensile properties – Part 2: Constant rate of elongation method (20 mm/min) ✓ 12.2009
DIN EN ISO 1974 2012-09 Paper – Determination of tearing resistance – Elmendorf method ✓ 12.2020
DIN EN ISO 20287 Hist 1994-09 Paper and board- Determination of moisture content- oven drying method
DIN EN ISO 22088-1 2006-11 Determination of resistance to environmental stress cracking (ESC)- Part 1: General Guidance
DIN EN ISO 22557 2021-02 Paints and varnishes – Scratch test using a spring-loaded pen
DIN EN ISO 2758 2014-12 Paper – Determination of bursting strength
DIN EN ISO 2813 2015-02 Paints and varnishes – Determination of gloss value at 20°, 60° and 85°
DIN EN ISO 291 2008-08 Plastics – Standard atmospheres for conditioning and testing
DIN EN ISO 306 2014-03 Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)
DIN EN ISO 3146 2022-06 Plastics Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
DIN EN ISO 3251 2019-09 Paints, varnishes and plastics – Determination of non-volatile-matter content
DIN EN ISO 3451-1 2019-05 Plastics – Determination of ash – Part 1: General methods
DIN EN ISO 3650 1999-02 Geometrical product specifications (GPS) – Length standards – Gauge blocks
DIN EN ISO 4120 2021-06 Sensory analysis – Methodology – Triangle test ✓ 01.2018
DIN EN ISO 4788 2005-08 Laboratory glassware – Graduated measuring cylinders
DIN EN ISO 4892-1 2016-10 Plastics – Methods of exposure to laboratory light sources – Part 1: General guidance
DIN EN ISO 4892-2 (based on) 2013-06 Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps
DIN EN ISO 4892-3 2014-02 Plastics – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV lamps
DIN EN ISO 527-1 2019-12 Plastics – Determination of tensile properties – Part 1: General principles ✓ 07.2007
DIN EN ISO 527-3 2019-02 Plastics – Determination of tensile properties – Part 3: Text conditions for films and sheets ✓ 07.2007
DIN EN ISO 535 2023-06 Paper and board – Determination of water absorptiveness – Cobb method
DIN EN ISO 536 2020-05 Paper and board – Determination of grammage
DIN EN ISO 5495 2016-10 Sensory analysis – Methodology – Paired comparison test
DIN EN ISO 60 2000-01 Plastics – Determination of apparent density of materials that can be poured from a specified funnel
DIN EN ISO 6383-1 2016-05 Plastics – Film and sheeting – Determination of tear resistance – Part 1: Trouser tear method ✓ 10.2015
DIN EN ISO 6383-2 2004-10 Plastics – Film and sheeting – Determination of tear resistance – Part 2: Elmendorf method ✓ 11.2022
DIN EN ISO 6427 2025-12 Determination of matter extractable by organic solvents
DIN EN ISO 648 2009-01 Laboratory glassware – Single-volume pipettes
DIN EN ISO 7500-1 2018-06 Metallic materials – Calibration and verification of static uniaxial testing machines – Part 1: Tension/compression testing machines – Calibration and verification of the force-measuring system
DIN EN ISO 7765-1 2004-10 Plastics film and sheeting – Determination of impact resistance by the free-falling dart method – Part 1: Staircase methods ✓ 12.2020
DIN EN ISO 8256 (Appendix A) 2024-03 Plastics – Determination tensile-impact strength
DIN EN ISO 8256 (based on) 2024-03 Plastics – Determination tensile-impact strength
DIN EN ISO 8295 2004-10 Plastics – Film and sheeting – Determination of the coefficients of friction ✓ 07.2007
DIN EN ISO 8442-2 2017-09 Materials and articles in contact with foodstuffs – Cutlery and table holloware – Part 2: Requirements for stainless steel and silver-plated cutlery
DIN EN ISO 8586 2023-09 Sensory analysis – Selection and training of sensory assessors
DIN EN ISO 8589 2014-10 Sensory analysis – General guidance for the design of test rooms
DIN EN ISO 8655-6 2002-12 Piston-operated volumetric apparatus ó Part 6: Gravimetric methods for the determination of measurement error
DIN EN ISO 868 2003-10 Plastics and ebonite – Determination of indentation hardness by means of a durometer (Shore hardness)
DIN EN ISO 899-1 2018-03 Plastics – Determination of creep behavior – Part 1: Tensile creep
DIN EN ISO 9001 2015-11 Quality management systems — Requirements
DIN EN ISO 9513 2013-05 Metallic materials – Calibration of extensometer systems used in uniaxial testing
DIN EN ISO/IEC 17025 2018-03 General requirements for the competence of testing and calibration laboratories
DIN Fachbericht 49 1995 Verfahren zur Vereinbarung von Farbtoleranzen
DIN IEC 93 1993-12 Methods of test for insulating materials for electrical parposes; Volume resistivity of solid electrical insulating materials
DIN ISO 12040 (based on) 1998-01 Graphic technology – Prints and printing inks – Assessment of light fastness using filtered xenon arc light
DIN ISO 1817 2016-11 Rubber, vulcanized or thermoplastic – Determination of the effect of liquids
DIN ISO 1924-3 2007-06 Paper and board – Determination of tensile properties – Part 3: Constant rate of elongation method (100 mm/min) ✓ 11.2024
DIN ISO 34-1 2004-07 Rubber, vulcanized or thermoplastic – Determination of tear strength – Part 1: Trouser, angle and crescent test pieces
DIN ISO 3781 2012-07 Paper and board – Determination of tensile strength after immersion in water ✓ 12.2020
DIN ISO 4593 2019-06 Plastics – Film and sheeting – Determination of thickness by mechanical scanning ✓ 07.2007
DIN ISO 7765-2 2009-02 Plastics film and sheeting – Determination of impact resistance by the free-falling dart method – Part 2: Instrumented puncture test
DIN ISO 8296 2008-03 Plastics – Film and sheeting – Determination of wetting tension
DIN SPEC 91446 2021-12 Classification of recycled plastics by Data Quality Levels for use and (digital) trading
DKD guideline 5-1 2023-11 Calibration of resistance thermometers
DKD guideline 5-4 2018-09 Calibration of temperature block calibrators
DKD guideline 5-7 2025-01 Calibration of climatic chambers
EDQM Metals and alloys 2024 Metals and alloys used in food contact materials and articles, a practical guide for manufacturers and regulators
EPBP QT 507 (colorimetry only) 2017-03 Quick Test Bleeding label
Euramet CG No.18 2015-11 Guidelines on the Calibration of non- automatic Weighing instruments
FhG Technical Bulletin 11 Teil 1 1971 Methods of test for cans – Part 1 – Determination of coating thickness (coating weight)
FhG Technical Bulletin 29 Blatt 1 1976-04 Testing of aluminum foils and thin bands – Testing for pores in coatings by copper deposition
FhG Technical Bulletin 6 Teil 2 Blatt 2 (withdrawn) 1981-02 Sheet 2 Determination of folded edges breaking force (based on DIN 53373)
FhG Technical Bulletin 6 Teil 6 1987 Methods of test for plastic bags – Part 6 – Determination of mass per unit area (grammage) of plastic film and fabric
FhG Technical Bulletin 6 Teil 9 1981-02 Test methods for plastic bags – Tear propagation test on folded edges of tubular films
FINAT FTM 1 2024-08 Adhesion test (180 °) at 300 mm/min ✓ 12.2012
FINAT FTM 10 2019-07 Silicone coatings for self-adhesive laminates: seperation force ✓ 12.2012
FINAT FTM 11 2024-08 Testing of silicone coatings: residual adhesive strength ✓ 12.2020
FINAT FTM 12 05 2001 Coating weight of the adhesive
FINAT FTM 2 2024-08 Adhesion test (90°) at 300 mm/min ✓ 12.2020
FINAT FTM 3 07-2019 Seperation force with slow pull-off ✓ 12.2020
FINAT FTM 6 2014-08 Resistance to ultraviolet light
FINAT FTM 9 2025-07 "Loop-tack" initial adhesion ✓ 12.2020
FINAT FTM TH10 07-2019 section 3 test equipment
GKV Blatt I- IV 2018-08 Testing and evaluation clause for polyethylene films and products thereof
In-house method (external provider) Inhouse method of an external provider
In-house method 026 08-2016 shrinkage
In-house method 034 07-2016 Fogging test
In-house method 099 01-1900 combination of several methods
In-house method PV036 2020-05 Sealing, pore and leakage tests
In-house method PV040 09-2019 Hysteresis tensile test
In-house method PV042 2020-02 Dimensions and repeating patterns
In-house method PV043 09-2018 curvature
In-house method PV049 2026-01 Microtome cross cut and microscopic length determination ✓ 09.2008
In-house method PV055 2024-11 10 ppb screening of commodities by GC-MS/FID ✓ 10.2015
In-house method PV056 2026-01 SML- Analysis for conformity assessment_Single substances ✓ 12.2020
In-house method PV056 (Appendix A) 2026-01 Determination of 9.9 – Bis (methoxymethyl)-9 H-fluorene 10.2015 01.2026
In-house method PV056 (Appendix B) 2026-01 Determination of Octadecyl-3-(3,5-Di-tert-butyl-4-hydroxyphenyl)propionate ✓ 01.2018
In-house method PV061 2019-09 Infrared spectroscopy
In-house method PV063 2017-11 oxygen content
In-house method PV064 2024-11 Determination of slip agents ✓ 11.2024
In-house method PV067 04-2018 Beilstein
In-house method PV072 2018-11 determination of weight
In-house method PV080 07-2020 Load capacity of bags and sacks
In-house method PV085 2022-03 Number
HDPE-S-01 (colorimetry only) #OSV__new_tsnormen__new_normprefix__# (2018 HDPE Bleeding Label Test
ISO 11357-2 2020-03 Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
ISO 11357-6 2018-03 Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 12632 2015-12-15 Graphic Technology – Ink, Paper and Labels_Requirements for Hot Alkali Penetration and Resistance
ISO 13302 2003-08 Sensory analysis — Methods for assessing modifications to the flavour of foodstuffs due to packaging ✓ 01.2018
ISO 15105-1 2007-10 Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure methods ✓ 12.2012
ISO 15105-2 (Appendix A) 2025-11 Plastics — Film and sheeting — Determination of gas-transmission rate — Part 2: Equal-pressure method ✓ 07.2007
ISO 187 1990-12 Paper, board and pulps; standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
ISO 2248 (withdrawn) 1988 Packaging – Complete, filled transport packages Part IV : Vertical impact test by dropping
ISO 23559 2011-11 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
ISO 2471 2008-12 Paper and board – Determination of opacity (paper backing) – Diffuse reflectance method
ISO 2836 2021-05 Graphic technology-Prints and printing inks-Assessment of resistance of prints to various agents
ISO 483 2005-11 Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
ISO 5636-3 Paper and board – Determination of air permeance (medium range) – Part 3: Bendtsen method
ISO 5636-5 2013-11 Paper and board – Determination of air permeance (medium range) – Part 5: Gurley method
ISO 5893 2019-07 Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
ISO 8791-2 2013-09 Paper and board – Determination of roughness/smoothness (air leak methods) – Part 2: Bendtsen method
IVLV Technical Bulletin No. 102 2010 Approach to leak testing; focus on gas-based leak testing.
IVLV Technical Bulletin No. 104 Set-off storage of food contact materials
IVLV Technical Bulletin No. 115/2019 2019-03 Leaflet on screening methods for non intentionally added substances (NIAS) in polymeric food contact materials Part 1: GC-MS/FID methods for semi-volatile components
IVLV Technical Bulletin No. 119 2022-06 Interpretation guide for the use of substitute simulants
JRC 53034 2009 Guidelines for performance criteria and validation procedures of analytical methods used in controls of food contact materials
JRC 77515 2012 Development of a harmonised method for specific migration into the new simulant for dry foods established in Regulation 10/2011
Leitlinien Methodenvalidierung 2005-01 Guidelines Method validation of the Federal Environment Agency
MIL PRF 131 2005-08 (L 2022-04 Performance Specification- Barrier Materials, Watervaporproof, Greaseproof, Flexible, Heat Sealable
MIL STD 3010 2008-03 (B Department of defense- Test procedures for packaging materials
OIML R 111-1 2004 Weights of classes E1, E2, F1, F2, M1, M1–2, M2, M2–3 and M3/ Part 1: Metrological and technical requirements
Directive HE-0815 (withdrawn)
Directive Normverweise nach der DKD-5-7 Normverweise nach der DKD-5-7
Sun Chemical Hartmann PV 03/03.1 11/2002 Determination of wrinkle resistance resp. wet wrinkle resistance
Sun Chemical Hartmann PV 04 11/2002 Determination of rub resistance
Sun Chemical Hartmann PV 16 11/2002 Determination of the deep freeze resistance
Sun Chemical Hartmann PV 20 2005-01 Determination of heat seal resistance with smooth sealing tools
SVI Guideline 2015-01_Innenbeutel 2016-01 Testing and evaluation of the barrier effectiveness of inner bags for food packaging in recycled cardboard
Tappi Tappi 559 cm 2012 Grease resistance test for paper and paperboard
Technical Report No. 01/2024 2024-10 Guidelines for the management of digitalised systems in laboratories accredited to ISO/IEC 17025
TL 8135-0003 2018-11 Packaging materials- Composite foils
TL 8135-0019 2021-11 Packaging materials- Polyethylen low density
TRGS 727 2016-07 Technical rule for hazardous substances – avoidance of ignition hazards due to static charges (replacement for TRBS 2153)
Validierung von Messverfahren, die eine Probenahme beinhalten (Eurachem) 2024 Validation of Measurement Procedures that Include Sampling (Eurachem)
VDI 3968 Blatt 5 2009-12 Safety of load units- Stretching
Regulation Fertigpackungsverordnung – FPackV 18.11.2020 Verordnung über Fertigpackungen und andere Verkaufseinheiten
§64 LFGB method L 00.00 6 2002-12 Determination of primary aromatic amines in aqueous test foods